DTF Transfers By Size
Looking to elevate your apparel game with bold, vibrant designs that last? Our DTF (Direct-to-Film) Transfers are your ticket to unleashing creativity without limits.
Why Choose Our DTF Transfers?
- Vibrant, Full-Color Prints: Experience eye-popping colours that make your designs stand out.
- Durable and Long-Lasting: Our transfers are built to withstand countless washes without fading or cracking.
- Easy and Fast Application: Our hot peel transfers are quick and easy to apply, requiring no weeding or pretreatment. Simply position, press and peel to achieve professional-quality results.
- Compatible With Your Favourite Garments: Suitable for materials like cotton polyester, blends, nylon, denim, even leather!
- Friendly For All Humans: Press with total confidence. Our inks are OEKO-TEX® certified, ensuring that they are free from any chemicals that could be harmful to human health.
- No Minimum Orders: Whether you're customizing a single tee or outfitting an entire crew, we've got you covered.
DTF Transfer Application Instructions
Applying your transfers is easy — just follow these steps and dial in your settings. No guesswork, no wasted blanks.
🔥 Step-by-Step Application
- 1. Pre-press your garment for 3–5 seconds to remove moisture.
- 2. Position your transfer where you want it on the garment.
- 3. Press with the recommended time, temp, and pressure (see below).
- 4. Peel the DTF film while it’s hot (our transfers are fast).
- 5. Cover with your cover sheet of choice.
- 6. Press again for 5 seconds to lock it in.
💪 Cotton, Blends & Most Materials
- Temp: 300ºF
- Time: 7-10 seconds
- Pressure: High
🏃♂️ Polyester & Sensitive Materials
- Temp: 280ºF
- Time: 7 seconds
- Pressure: High
Pro Tip: Every heat press is a little different
🛠️ DTF Application FAQ & Troubleshooting
❓ My transfer isn’t sticking — what’s going on?
Double-check your temperature, pressure, and time. If your press isn’t hot enough or you’re using too little pressure, the adhesive won’t bond properly. Use a heat gun or temp strip to verify your press temp.
❓ The edges are lifting after pressing.
Give it a second press with a parchment or kraft cover sheet for 5 seconds. This helps seal the edges and lock in the adhesive.
❓ The film doesn’t peel cleanly.
Make sure you're using firm, even pressure. If parts lift with the film, let it cool slightly and try a cold peel — or add a bit more pressure on the next press.
❓ Can I use a home iron or Cricut EasyPress?
Technically yes, but not recommended. These tools don’t give consistent temperature or pressure across the surface. For clean, pro results, a real heat press is a must.